Dando Mule Track Carrier

The Dando Mule ATV-5 track carrier is a safe, powerful workhorse for moving tools, consumables and ancillary equipment around site.

With every drilling and construction operation there is a need to move equipment and materials across rough terrain in a safe and cost effective way. The design of the Dando Mule ATV5-RC track carrier allows it to be operated from distance by remote control and therefore ensuring the operator maintains an optimal view while tracking from a safe distance. The removal of the operator from within the vehicle also makes for a much lighter machine as well as having an increased pay load capacity – the machine is capable of carrying loads of up to 5000kg.

Features
  • Track laying highly manoeuvrable vehicle
  • Turns within own length
  • Can fit inside a standard shipping container
  • Remote control operated, with manual and umbilical backup
  • Maximum payload of 3 to 5 tonne, dependent upon specification
  • Removable load beds in standard 3m and extended 3.6m lengths
  • Specialist load bed configurations available (fuel bowser, pipe carrier, etc)
  • Self-loading/unloading
  • Multiple track options
  • Twin speed tracking
  • Remote start & stop
  • Height: 1.8m
  • Width: 1.8m
  • Length: 4.81m (standard load deck)
Specification
Case Studies
Options
Drilling Depths

Multitec 4000 MK3 Videos

"Despite its incredible power and versatility, the small size of the Multitec 4000 MK3 ensures running and maintenance costs are kept low."

Latest News

Terrier Video: Mineral Sands

Dando’s Callum me as just returned from a visit to customer Green Gold Engineering who are sampling mineral sands in Indonesia. The geology in the area poses many difficulties for representative sample recovery at high levels with running sands being a particular problem. Ask any driller how the approach running sands and you are likely … Read more

About this event

Dando Cable Percussion Rigs

Dando Drilling International is pleased to announce that with the new emissions standards which are due to come into effect in 2019, Dando will be bringing to market a new CP rig, the “Duke”. The new “Duke” will incorporate improved functionality, reliability and allow for the use of alternative engines that will meet (or exceed) … Read more

About this event

Multitec 4000 MK3 – Safe, Cost Effective, Efficient

The New Multitec 4000 MK3 comes with a range of features for increased safety, user friendliness, efficiency and cost effectiveness. Safe and User Friendly Designed in line with  the  high  standards  set by UK, European and international mine site operators, the Multitec 4000 builds on decades of experience in exploration drilling to provide a machine … Read more

About this event

Dando Terrier for Alluvial Gold Exploration

Indonesian Gold specialists PT Green Gold Engineering recently received a Dando Terrier for alluvial gold exploration on a new concession of mineral sands in Kalimantan. Requiring samples in the 10-15m range, Green Gold’s drilling division, Indrill, required a small, lightweight rig with low ground pressure to navigate the fine powder-white sand. The rig also needed … Read more

About this event

Terrier Mk2 Rigs for UK Site Investigation

Two new Terrier Mk2 rigs setup for percussive sampling have been delivered to customers in the UK over the last few months. The first of these, STM Environmental Consultants are using the rig for site investigation in the Reading area. The purchase of the Terrier Mk2 rig is their first acquisition as they bring drilling … Read more

About this event

Multitec 4000 MK3 Impressing in Tanzania

Norplan Tanzania Ltd recently purchased one of Dando’s newest additions to the range, the Multitec 4000 Mk3. Requiring a variety of different site investigation drilling methods, Norplan have enjoyed success using the rig for Geobor S coring to depths of 30m and H-Wireline to 80m. They are also using Shelby tubes and a hydraulic piston … Read more

About this event

Blocked Bit When Drilling With Mud

Have you ever blocked your bit off when drilling with mud and when you pull out you find that the bit and the first one or two drill rods above the bit are full of sand? If you are unsure as to the reason why this has happened it is because of an imbalance of … Read more

About this event

Developing the New Multitec 4000 MK3

Market pressures in the mineral sector have resulted in innovation at Dando Drilling International and has led to the production of their current best selling exploration rig, the Multitec 4000. “The Multitec 4000 is the most significant new rig in our mineral exploration range at the moment,” said Dando Sales Director, Quentin Dulake, in a … Read more

About this event

NEW Multitec 4000 MK3 Now Available

The Multitec 4000 MK3 is the latest development in Dando’s range of powerful yet compact multipurpose drilling rigs. Occupying a small footprint, the multipurpose rig is able to carry out a wide range of drilling techniques in areas of difficult access. The Mk3 has more power, a highly efficient Bosch-Rexroth hydraulic system and revised layout of … Read more

About this event

Multitec 4000 MK3: A multipurpose rig that performs like a dedicated machine for each and every project.

Contact a member of the Dando Asia Sales Team